Relayed Tunnel Hamachi Fix -

When a Hamachi client displays a blue dot (or explicitly lists "Relayed" in the peer details), it indicates the UDP hole-punching mechanism failed.

Look for settings and ensure it is Enabled . This allows Hamachi to automatically open the ports it needs. 5. Set a Static Port in Hamachi

A in LogMeIn Hamachi (indicated by a blue dot) occurs when the software cannot establish a direct peer-to-peer connection between two computers, often due to strict firewall settings or restrictive NAT (Network Address Translation) on your router. While the connection still works, it is routed through Hamachi's servers, which can cause high latency, lag in gaming, and slower file transfers. relayed tunnel hamachi fix

Go to .

✅ Ensure both peers are not on symmetric NAT. Have at least one peer with UPnP or open UDP ports to establish a direct tunnel. When a Hamachi client displays a blue dot

On command line (Windows):

Hamachi Relayed Tunnel & Ping Request Timed Out Error – Zumtek. Hamachi Relayed Tunnel & Ping Request Timed Out Error. January 22, Zumtek Color indicators in LogMeIn Hamachi - GoTo Support There is a relay tunnel between the client and the peer. You may have to set a static TCP or UDP port for LogMeIn Hamachi to use. ... GoTo Failure to connect to the mediation server in Hamachi Common causes include the following: * A firewall on your computer or network is blocking Hamachi. * Your network uses a proxy or ... GoTo Hamachi Relayed Tunnel & Ping Request Timed Out Error Dec 29, 2012 — 2012 — hamachi cmd force-route &lt

hamachi cmd force-route <peer-id> direct

On the client that is currently relayed, try:

| Fix | Success chance | Difficulty | |-----|----------------|-------------| | Restart Hamachi service | Low | Easy | | Allow UDP in firewall | High | Medium | | Disable other VPNs | Medium | Easy | | Enable UPnP on router | High | Medium | | Manual port forwarding | High | Hard (per network) | | Reinstall Hamachi | Medium | Easy |

Forward and UDP 32976 to your PC’s local IP. Note: Only works for one client behind the same router.